Biomimetic antifouling coating

Anti-fouling is the ability of specifically designed coatings to remove or prevent biofouling by any number of organisms on wetted surfaces.[1] Since biofouling can occur almost anywhere water is present, biofouling poses risks to a wide variety of objects such as medial devices and membranes as well as to entire industries, such as paper manufacturing, food processing, underwater construction, and desalination plants.[2] Specifically, the buildup of biofouling on marine vessels poses a significant problem. In some instances the hull structure and propulsion systems can become damaged.[3] Over time, the accumulation of biofoulers on hulls can increase both the hydrodynamic volume of a vessel and the frictional effects leading to increased drag of up to 60%[4] The drag increase has been seen to decrease speeds by up to 10%, which can require up to a 40% increase in fuel to compensate.[4] With fuel typically comprising up to half of marine transport costs, biofouling methods are estimated to save the shipping industry around $60 billion per year.[4] Increased fuel use due to biofouling contributes to adverse environmental effects and is predicted to increase emissions of carbon dioxide and sulfur dioxide between 38 and 72 percent by 2020.[5]

A variety of anti-fouling methods have historically been implemented in order to combat biofouling. Recently, anti-fouling methods inspired by living organisms have become the subjects of intense research by scientists looking for more environmentally friendly and effective ways of reducing biofouling. This type of design imitation is known as biomimicry.

Contents

Biomimetic Anti-fouling Coatings

Historical and current approaches

Throughout history, a variety of methods have been used to combat biofouling. Descriptions of pitch or metal sheathing were common for centuries before eventually moving into toxic but effective tributyltin (TBT) or tributyltin oxide (TBTO) containing paints in the 1950s.[6] Copper has also been used as both an anti-fouling coating as well as a biocide with less bioaccumulation or adverse environmental effects than TBT, while remaining less effective.[7] The 2008 worldwide ban on the use of TBT containing paints by the International Maritime Organization has excited research into environmentally friendly and effective anti-fouling techniques.[8] Many of these focus on the development of biomimetic methods to replace the current standard of polydimethylsiloxane, or PDMS. PDMS consists of a non-polar backbone made of repeating units of silicon and oxygen atoms. The non-polar nature of PDMS causes the coating to have a high interfacial energy with the surrounding water of 52 mJ m-2.[9] Furthermore, the non-polarity of PDMS allows for biomolecules to readily adsorb to its surface in order to lower interfacial energy. However, PDMS also has a low modulus of elasticity and surface energy (19.8 mJ m-2) that allows for the release of fouling organisms at speeds of greater than 20 knots. The dependence of effectiveness on vessel speed limits the use of PDMS on slow moving ships or those that spend significant amounts of time in port.[2]

Fouling methods and organisms

The variety among biofouling organisms is highly diverse and extends far beyond contamination by barnacles and seaweeds. According to some estimates, over 1700 species comprising over 4000 organisms can attribute to biofouling.[6]

Biofouling does not occur in one mass sedimentation, but is often broken into a series of steps. First, within hours of the hull being exposed to the marine environment, Van der Waals forces attract small organic molecules present in the seawater, such as such as polysaccharides, proteins, and proteoglycans to the hull.[10] Within 24 hours the adhesion of these organic molecules conditions the surface of the hull for the attachment of larger species such as bacteria and algae. As more bacteria and diatoms attach to the surface, a microbial biofilm coating the hull is produced.[11] The microorganisms present in the biofilm serve as food for larger microorganisms such as microalgae and protozoans, which attach to the hull over the microbial biofilm and create a relatively rough surface. The process of biofilm development takes around 1 week. After the hull is coated with a rough biofilm, it is then primed for the attachment of larger macrofoulers, such as barnacles and seaweed. Over a period of 2-3 weeks, the larvae of macrofoulers and macroalgae begin to develop, creating a hull that is sufficiently fouled.[3]

Biomimetic methods

Biomimetic design describes the process of using living organisms as the inspiration for new functional materials. For instance, many large and slow moving marine animals like whales are able to effectively prevent biofouling on their skin. For marine anti-fouling purposes, biomimetic designs typically fall into two categories: physical and chemical.

Physical methods

Biomimetic physical methods aim to create a mechanical surface that deters bioaccumulation.

Mussel adhesive proteins

One of the more common methods of anti-fouling come from growing polymer chains from a surface, often by poly(ethylene glycol) or PEG.[12] However, challenges exist in creating a functionalized surface to which PEG chains may be grown from, especially in aqueous environments. Researchers have been able to study the methods by which the common blue mussel Mytilus edulis' is able to adhere to solid surfaces in marine environments using mussel adhesive proteins, or MAPs. MAPS are typically comprised a number of proteins, of which the most common repeating sequence is Ala-Lys-Pro-Ser-Tyr-trans-2,3-cis-3,4-dihydroxyproline (DHP) -Hyp-Thr-3,4-dihydroxyphenylalanine (DOPA) -Lys.[13] The inclusion of the hydroxylated DHP and DOPA amino acids are thought to contribute to the adhesive nature of the MAPs. Recent studies have looked into using a short chain of DOPA residues as an adhesive end-group for anti-fouling PEG polymers which show promise in adsorbing onto certain metal surfaces. The increasing the number of DOPA residues to 3 greatly improves the total amount of adsorbed DOPA-PEG polymers and exhibits anti-fouling properties exceeding most other 'grafting-to' polymeric functionalization methods.[12]

The anti-fouling characteristics of PEG are well documented, but the service lifetime of PEG anti-fouling coatings is debated due to the self-hydrolysis of PEG chains in air as well as by the low concentrations of transition metal ions present in seawater.[2] Using DOPA residues as attachment points, new polymers similar in structure to the polypeptide backbone of proteins are being investigated, such as peptidomimetic polymer (PMP1). PMP1 utilizes a repeat unit of N-substituted glycine instead of ethylene glycol to impart antifouling properties. The N-substituted glycine is structurally similar to ethylene glycol, is hydrophilic, and is easily dissolves in water. In controlled studies, PMP1 coated titanium surfaces were seen to be resistant to biofouling over a period of 180 days, even with continued addition and exposure to microfouling organisms.[12][14]

Barnacle cement

Similar to MAPs, barnacle cement is composed primarily of adhesive proteins.[15] The composition of barnacle cement is known to be both non-toxic and stable over a long period of time[16] and also shows a significant attachment strength as an adhesive.[17] The sequence and composition of these proteins is highly dependent on the surface of attachment, allowing for the barnacles to securely attach to a number of surfaces. Barnacle cement proteins contain a significant amount of hydroxyl groups which can be used as starting points to grow antifouling polymer brushes from using ATRP using Atom Transfer Radical Polymerization (ATRP). Using harvested barnacle cement applied to stainless steel and functionalized, Poly(hydroxyethyl methacrylate) (PHEMA) brushes have been grown and coupled with chitosan in order to create a surface that reduces the settlement of E.coli.[15]

Shark skin

Shark skin, alongside that of many other large marine animals such as dolphins and whales, exhibits a high degree of nanoscale surface roughness that imparts a low wettability which limits biofouling. The surface of shark skin consists of nanoscale overlapping plates that exhibit parallel ridges that effectively prevents sharks from becoming fouled even when moving at slow speeds. A commercial shark skin analogue coating has been developed at the University of Florida under the name of Sharklet AF.[18] The anti-fouling qualities of the shark skin inspired designs appear highly dependent upon the Engineered Roughness Index (ERI).[19]

 ERI = { r \times n \over 1 - \phi}

Where r is the Wenzel roughness ratio, n is the number of distinct surface features in the design of the surface, and φ is the area fraction of the tops of the distinct surface features. A completely smooth surface would have an ERI = 0.[18]

Using this equation, the amount of microfouling spores per mm2 can be modeled according to the equation:

 \text{ln(settlement)}  { \text{spores} \over \text{mm}^2 } = -7.47 \times 10^{-2} \times ERI %2B 6.28

Similar to actual shark skin, the patterned nature of Sharklet AF shows micro-structural differences in three dimensions with a corresponding ERI of 9.5. This three dimensional patterned difference imparts a 77% reduction in microfouling settlement.[20] Other artificial non-patterned nanoscale rough surfaces such as 2μm diameter circular pillars (ERI = 5.0), 2 μm wide ridges (ERI = 6.1) reduce fouling settlement by 36% and 31% respectively, while a more patterned surface composed of 2 μm diameter circular pillars and 10 μm equilateral triangles (ERI = 8.7) reduces spore settlement by 58%.[20] The contact angles obtained for hydrophobic surfaces are directly related to surface roughnesses by the Wenzel equation.[21]

 \cos \theta_w = r \times \cos \theta

θW refers to the observed contact angle, r to the Wenzel roughness (actual area of surface over the projected surface area), and θ refers to the real contact angle in the Wenzel equation. As seen in the Wenzel equation, for surfaces of a hydrophobic nature (θ=90°-180°) an increased roughness leads to exaggeration of the hydrophobic properties. In the case of shark skin and similar biological surfaces (lotus leaf and gecko setae)[21][22], the nano- and micro-structured hydrophobic surfaces have heightened contact angles as compared to hydrophobic surfaces like polypropylene and polyethylene.

Polymer Contact Angle (θ) (°) Receding Contact Angle (θR) (°) Advancing Contact Angle (θA) (°)
Poly(dimethylsiloxane)(PDMS)[23] 113 118 72
High Density Polyethylene (HDPE)[24] 107 112 77
Polypropylene (PP)[24] 116 123 78
Sharklet AF (+3SK2 x 2)[23] 135 160 112
Lotus Leaf[21] 142.4 N/A N/A
Gecko setae[22] 160.6 159.3 160.7

Chemical methods

Most chemical methods are based upon the synthesis of naturally produced molecules that prohibit fouling, known as biocides. When incorporated into marine coatings, biocide leech out to the immediate surroundings and discourage fouling. Compared to TBT, natural biocides typically show lower environmental impact and varying effectiveness.

Natural biocides are found in a variety of sources, including (sponges, algae, corals, sea urchins, bacteria, sea-squirts)[3] and include toxins, anaesthetics, growth/attachment/metamorphosis inhibiting molecules.[7] As a group, marine microalgae alone are produce over 3600 secondary metabolites that play complex ecological roles including defense from predators as well as antifouling protection,[25] increasing scientific interest in the screening of marine natural products as natural biocides. Natural biocides are typically broken into two categories: terpenes (often containing unsaturated ligand groups and electronegative oxygen functional groups) and non-terpenes.

Various tannins (non-terpene), naturally synthesized by a variety of plans, have been shown to be effective biocides when coupled with additional metal biocide agents like copper and zinc.[8] The tannins are able to flocculate with a variety of cations which then react with biomolecules as antiseptics. The most effective natural biocide is 3,4-dihydroxybufa-20,22 dienolide, or bufalin (a steroid of toad poison from Bufo vulgaris), which is over 100 times more effective than TBT at preventing biofouling.[7] Extensive difficulty currently exists in the laboratory synthesis of many natural products, limiting their availability and commercial application. A few natural compounds with simpler synthetic routes, such as nicotinamide or 2,5,6-tribromo-1-methylgramine (from Zoobotryon pellucidum), have been recently been incorporated into patented antifouling paints. In particular, 2,5,6-tribromo-1-methylgramine shows 3-6 times the antifouling activity of TBTO against barnacle attachment while remaining 10 times less lethal to the barnacles.[7]

One of the most significant drawbacks to biomimetic chemical methods comes from their service lifetime. Since the natural biocides must leech out of the coating in order to be effective, the rate of leeching must be controlled in such a way that maximizes effectiveness and service life. The total amount of biocide released into the environment must be ideally kept to a minimum as to not disrupt the ecosystem. Assuming that biocide release remains relatively constant after the first two weeks exposure to water, the total amount of biocide released can be calculated by taking into account a number of variables according to the following formula:[26]

 \text{Total biocide release} = {  L_\text{a} \times a \times W_\text{a} \times 100 \over\ SVR \times SPG \times DFT}

Where La is the fraction of the biocide actually released (typically around 0.7), a is the weight fraction of the active ingredient in the biocide, DFT is the dry film thickness , Wa is the concentration of the natural biocide in the wet paint, SPG is the specific gravity of the wet paint, and SVR is the percent volume of dry paint to wet paint.

See also

References

  1. ^ Yebra, DM; Kiil, S; Johansen, KD (2004). "Antifouling technology-past,present and future steps toward efficient and environmentally friendly antifouling coatings". Progress in Organic Coatings 50: 75–104. doi:10.1016/j.porgcoat.2003.06.001. 
  2. ^ a b c Vladkova, T (2009). "Surface Modification Approach to Control Biofouling". Marine and Industrial Biofouling 4 (1): 135–163. doi:10.1007/978-3-540-69796-1_7. http://www.springerlink.com/content/w2201048t6115k63/. Retrieved 2 June 2011. 
  3. ^ a b c Chambers, LD; Stokes, KR; Walsh, FC; Wood, RJK (2006). "Modern approaches to marine antifouling coatings". Surface and Coatings Technology 6 (4): 3642–3652. doi:10.1016/j.surfcoat.2006.08.129. http://www.sciencedirect.com/science/article/pii/S0257897206009364. Retrieved 25 May 2011. 
  4. ^ a b c Vietti, P (Fall). "New Hull Coatings Cut Fuel Use, Protect Environment". Currents: 36–38. http://www.enviro-navair.navy.mil/currents/fall2009/Fall09_New_Hull_Coatings.pdf. Retrieved 6 June 2011. 
  5. ^ Salta, M; Warton, J; Stoodley, P; Dennington, S; Goodes, L; Werwinski, S; Mart, U; Wood, R et al. (2008). "Designing biomimetic antifouling surfaces". Phil. Trans. R. Soc 368 (1929): 4729–4754. doi:10.1098/rsta.2010.0195. http://rsta.royalsocietypublishing.org/content/368/1929/4729. Retrieved 25 May 2011. 
  6. ^ a b Almeida, E; Diamantino, T; de Sousa, O (2007). "Marine paints: The particular case of antifouling paints". Process in Organic Coatings 59 (1): 2–20. doi:10.1016/j.porgcoat.2007.01.017. http://www.sciencedirect.com/science/article/pii/S0300944007000124. Retrieved 1 June 2011. 
  7. ^ a b c d Omae, I (2003). "General Aspects of Tin-Free Antifouling Paints". http://pubs.acs.org/doi/abs/10.1021/cr030669z 103 (9): 3431–3448. doi:10.1021/cr030669z. http://pubs.acs.org/doi/abs/10.1021/cr030669z. Retrieved 6 June 2011. 
  8. ^ a b Bellotti, N; Deya, C; del Amo, B; Romagnoli, R (2010). "Antifouling Paints with Zinc "Tannate"". Ind. Eng. Chem. Res. 49 (7): 3386–3390. doi:10.1021/ie9010518. http://pubs.acs.org/doi/abs/10.1021/ie9010518. Retrieved 2 June 2011. 
  9. ^ Krishnan, S (2008). "Advances in polymers for anti-biofouling surfaces". Journal of Materials Chemistry 12 (29): 3405–3413. doi:10.1039/B801491D. http://pubs.rsc.org/en/Content/ArticleLanding/2008/JM/b801491d. Retrieved 6 June 2011. 
  10. ^ Bakker, D (2003). "The Effect of Dissolved Organic Carbon on Bacterial Adhesion to Conditioning Films Adsorbed on Glass from Natural Seawater Collected during Different Seasons". Biofouling: The Journal of Bioadhesion and Biofilm Research 19 (6): 391–397. doi:10.1080/08927010310001634898. http://www.informaworld.com/smpp/content~db=all~content=a713677701. Retrieved 6 June 2011. 
  11. ^ Callow, J (2006). "Biofilms". Marine Molecular Biotechnology 42: 141–169. doi:10.1007/3-540-30016-3_6. http://www.springerlink.com/content/m701627742422318/. Retrieved 6 June 2011. 
  12. ^ a b c Dalsin, J; Messersmith, P (2005). "Bioinspired antifouling polymers". Materials Today 8 (9): 38–46. doi:10.1016/S1369-7021(05)71079-8. http://www.sciencedirect.com/science/article/pii/S1369702105710798. Retrieved 25 May 2011. 
  13. ^ Taylor, S (1994). "trans-2,3-cis-3,4-Dihydroxyproline, a New Naturally Occurring Amino Acid, Is the Sixth Residue in the Tandemly Repeated Consensus Decapeptides of an Adhesive Protein from Mytilus edulis". J. Am. Chem. Soc. 116 (23): 10803–10804. doi:10.1021/ja00102a063. http://pubs.acs.org/doi/abs/10.1021/ja00102a063. Retrieved 7 June 2011. 
  14. ^ Statz, A (2005). "New Peptidomimetic Polymers for Antifouling Surfaces". J. Am. Chem. Soc. 127 (22): 7972–7973. doi:10.1021/ja0522534. http://pubs.acs.org/doi/abs/10.1021/ja0522534. Retrieved 7 June 2011. 
  15. ^ a b Yang, WJ; Cai, T; Kang, ET; Dickinson, GH; Teo, SL; Rittschoff, D (2001). "Biomimetic anchors for antifouling and antibacterial polymer brushes on stainless steel". Langmuir 27 (11): 7065–7076. doi:10.1021/la200620s. http://pubs.acs.org/doi/abs/10.1021/la200620s. Retrieved 25 May 2011. 
  16. ^ Kamino, K (2008). "Underwater Adhesive of Marine Organisms as the Vital Link Between Biological Science and Material Science". Marine Biotechnology 10 (2): 111–121. doi:10.1007/s10126-007-9076-3. http://www.springerlink.com/content/bm257562434405u4/. Retrieved 7 June 2011. 
  17. ^ Berglin, M (2001). "The adhesion of the barnacle, Balanus improvisus, to poly(dimethylsiloxane) fouling-release coatings and poly(methyl methacrylate) panels: The effect of barnacle size on strength and failure mode". Journal of Adhesion Science and Technology 15 (12): 1485–1502. doi:10.1163/156856101753213321. http://www.ingentaconnect.com/content/vsp/ast/2001/00000015/00000012/art00008. Retrieved 7 June 2011. 
  18. ^ a b Brennan, Anthony. "Anthony B. Brennan Research Group". University of Florida. http://brennan.mse.ufl.edu/Research/antifouling.html. Retrieved 6 June 2011. 
  19. ^ Long, C (2010). "A model that predicts the attachment behavior of Ulva linza zoospores on surface topography". Biofouling 26 (4): 411–419. doi:10.1080/08927011003628849. http://www.informaworld.com/smpp/section?content=a919515111&fulltext=713240928. Retrieved 6 June 2011. 
  20. ^ a b Schumacher, J (2007). "Engineered antifouling microtopographies - effect of feature size, geometry, and roughness on settlement of zoospores of the green alga Ulva". Biofouling 23 (1): 55–62. doi:10.1080/08927010601136957. http://www.informaworld.com.ezproxy.lib.calpoly.edu/smpp/content~db=all~content=a776600187. Retrieved 7 June 2011. 
  21. ^ a b c Cheng, Y; Rodak, D; Wong, C; Hayden, C (2006). "Effect of micro- and nano-structure on the self-cleaning behaviour of lotus leaves". Nanotechnology 17: 1359–1362. doi:10.1088/0957-4484/17/5/032. 
  22. ^ a b Autumn, K; Hansen, W (2006). "Ultrahydrophobicity indicates a non-adhesive default state in gecko setae". J. Comp. Physiol. A 192: 1205–1212. doi:10.1007/s00359-006-0149-y. 
  23. ^ a b Long, C; Schumacher, J; Brennan, A (2009). "Potential for Tunable Static and Dynamic Contact Angle Anisotropy on Gradient Microscale Patterned Topographies". Langmuir 25: 12982–12989. doi:10.1021/la901836w. 
  24. ^ a b Ucar, I; Cansoy, C; Erbil, H; Pettitt, M; Callow, M; Callow, J (2010). "Effect of contact angle hysteresis on the removal of the sporelings of the green alga 'Ulva' from the fouling-release coatings synthesized from polyolefin polymers". Biointerphases 5: 75–84. doi:10.1116/1.3483467. 
  25. ^ Bhadury, P (2004). "Exploitation of marine algae: biogenic compounds for potential antifouling applications". Exploitation of marine algae: biogenic compounds for potential antifouling applications 219 (4): 561–578. doi:10.1007/s00425-004-1307-5. http://www.springerlink.com/content/ctk6y2ry9l3vhyjq/. Retrieved 7 June 2011. 
  26. ^ "Emission Scenario Document on Antifouling Products Annex". Biocides Publications. Organisation for Economic Co-operation and Development. http://www.oecd.org/dataoecd/33/37/34707347.pdf. Retrieved 6 June 2011.